JHEMCU GF16  2-4S 16*16 F405 Flight Controller 13A 4IN1 ESC Stack

Remark. FC shipped with BF 4.2.8. Diff shows
  board_name JHEF405
  manufacturer_id JHEM
However, flash this target with BF 4.3.0 and bricked the FC.
Need to confirm with JHEMCU which target to use.
 
The JHEMCU GF16  is a 2-4S F4 Stack
There are 5 serial ports (UART1, UART2, UART3, UART4, UART6), 8 motor ports, one I2C port, one SBUS interface (the serial port used by SBUS is RX1),
and the WS2812 interface is reserved. Built-in black box 16MB and barometer, buzzer interface, camera interface.
 
Flight control parameters:
CPU: STM32F405
Gyroscope/Accelerometer: MPU6000
OSD: AT7456E
Barometer: BMP280
Black box: 16MB
IIC: Support
BEC: 5V/3A
Number of motor channels: 8 M1-M8
UART: UART1 (RC), UART2, UART3, UART4, UART6
USB: micro usb
Size: 16*16MM M3
Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DSMX
Support programmable LED such as WS2812
Support buzzer
Built-in voltage and current sensors
 
ESC parameters:
1. Input voltage: 2-4S LiPo/2-4S HV LiPo
2. BEC output: none
3. Continuous working current of single ESC: 13A*4
4. External ESC size: 24*25mm (including the maximum size of pads and protruding points)
5. Screw hole pitch 16*16MM, aperture 3MM
6. Firmware: BLHELI_S G_H_30_16_7.HEX
7. Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signals
 
Weight: flight control + ESC = 5.8 grams
 
 
 
arrow
arrow
    文章標籤
    Quadcopter FPV 穿越機 組機技巧
    全站熱搜

    Wayne Lin 發表在 痞客邦 留言(0) 人氣()

    E-mail轉寄